‧English ‧繁體中文 ‧简体中文　　首页 | 网站导览
首页 > 技术服务 > 应用信息
应用信息
PECL and LVDS
PECL stands for “Positive Emitter Coupled Logic”. PECL are differential logic outputs commonly used in high-speed clock distribution circuits. Low Voltage PECL (LVPECL) denotes PECL circuits designed for use with 3.3V or 2.5V supply, the same supply voltage as for low voltage CMOS devices....more
Side Pads on Crystal Oscillators
Side pads are metal pads on the side of crystal oscillator packages. Pads are generally on the short side of the package. Side pads are used to measure electrical characteristics of crystal blanks after assembly in order to further assure quality of the blanks before shipment....more
Utilize Clipped Sine Waveform in Circuit Design
Clipped sine waveform is the most popular output option for TCXOs. Low power consumption for improved thermal characteristics :Better aging and frequency stability performance. Better phase noise performance than CMOS output....more
Tri-State Function in Crystal Oscillators.
In oscillator with Tri-state function, oscillator output can be controlled by the Tri-state pin as follows: Logic High : Output Enable ; Logic Low : Output Disable. The Tri-state function would allow output pin to assume high-impedance state, effectively removing the oscillator output from the circuit. Oscillator circuits can remain on or be turned off while output is disabled in Tri-State....more
Inverted MESA Blank
Oscillator frequency is inversely proportional to the thickness of the crystal blank. The higher the frequency, the thinner the crystal blanks. Inverted Mesa technology creates a region on the crystal blank much thinner than polished blanks for resonating. Thicker crystal material surrounding the “well” provides robust structural support for better reliability. Inverted Mesa blanks can be used in crystals, crystal oscillators and VCXOs for high fundamental frequency applications. ...more
How to Minimize EMI effect on Crystal Oscillators
For TATIEN crystal oscillators, top metal covers are electrically connected to GND terminals. The metal covers provide effective shielding against EMI from ASIC inside the oscillator. ...more

 1 

泰艺电子股份有限公司
(总公司)100台北市博爱路76号5楼 | E-mail: sales@taitien.com.tw | Tel: +886-2-2381-1183 | Fax: +886-2-2361-7529
(销售业务/工厂)238 新北市树林区树潭街5号 | TEL:+886-2-2686-1287 | FAX:+886-2-2681-9610		 2010 © All Rights Reserved.
Terms and Conditions